China Suppliers Factory for ASTM A350 LF1, LF2, LF3 Carbon/Alloy Steels - Pipeline and Forged Flanges
General Characteristics
These grades of steel are used as pipeline steels and also in the production of forged flanges. They are suitable for use down to –20ºF (LF1), –50ºF (LF2) and –150ºF (LF3).
Designation by Standards
| Mat. No. | DIN | EN | AISI |
|---|---|---|---|
| 1.5622 | 14Ni6 | - | A350 |
Chemical Analysis
LF1:
| C% | Mn% | Si% | S% | P% | Cr% | Ni% |
|---|---|---|---|---|---|---|
| 0.30 max | 0.6/1.35 | .15/.30 | .040 max | .035 max | 0.30 max | 0.40 max |
LF2:
| C% | Mn% | Si% | S% | P% | Cr% | Ni% |
|---|---|---|---|---|---|---|
| 0.30 max | 0.6/1.35 | .15/.30 | .040 max | .035 max | 0.30 max | 0.40 max |
LF3:
| C% | Mn% | Si% | S% | P% | Cr% | Ni% |
|---|---|---|---|---|---|---|
| 0.20 max | 0.90 | .20/.35 | .040 max | .035 max | 0.30 max | 3.3/3.7 |
Applications
These steels are primarily used for pipelines and forged flanges.
Forging
LF1 and LF2 grades would ideally be forged at around 2250-2300ºF (1230-1260ºC) and can’t be forged below 1650-1700ºF (900-925ºC.) The LF3 grade would be forged at around 2150-2200ºF (1175-1205ºC) and can’t be forged below 1700ºF (925ºC.)
Welding / Heat Treatment
Heat treatment of pipeline steels will no doubt be done on a continuous basis after welding. The structure of these steels will be initially determined by the rolling/forging process. The pipeline itself will be supplied from hot-rolled steels, the flanges etc. from forgings. The actual welding process will be primordial in ensuring the suitability and security of the pipeline and its subsequent performance. Preheat and post heat treatments are essential.
The three grades listed here are easily weldable by all tried and tested methods.
Machinability
In the case of forged fittings and flanges, these grades can be machined as required, and ongoing experience will determine if machining is best done on an as-forged structure, a normalized structure or an annealed structure. In either case, in view of the critical nature of the end use, advice should be taken from a recognized heat treatment company.
Frequently Asked Questions
These steel grades are primarily used for pipelines and the production of forged flanges.
They are suitable for service down to –20ºF for LF1, –50ºF for LF2, and –150ºF for LF3.
LF1 and LF2 grades should ideally be forged at around 2250-2300ºF (1230-1260ºC) and cannot be forged below 1650-1700ºF (900-925ºC). The LF3 grade is forged at 2150-2200ºF (1175-1205ºC) and cannot be forged below 1700ºF (925ºC).
Yes, all three grades are easily weldable by all tried and tested methods. However, preheat and post-heat treatments are essential to ensure the suitability and security of the pipeline.
According to the standards, material number 1.5622 is designated as 14Ni6 under DIN standards and A350 under AISI standards.
These grades can be machined as required. Ongoing experience will determine whether machining is best done on an as-forged, normalized, or annealed structure. Due to the critical nature of their end use, it is advised to consult a recognized heat treatment company.